Adding the necessary amount of chemicals needed
Chemicals added in the wet-end of any kind of paper or board production are a cost factor and influence the performance of the process. Either they are process chemicals or functional chemicals. A common goal for all productions is to use as much as necessary but less as possible.
To reach that goal it is important to measure the reaction of chemicals in the process. That can be a measurement of cationic demand to unveil raw material variations and use chemicals to stabilize these variations. With this approach, a specific dosage of a functional additive will always provide a specific improvement in a quality parameter. That helps operators to reach their paper quality targets faster and more stable.
Another measurement to stabilize the wet-end, is the headbox and white water consistency measurement. With these two measurements, it is known how much of the raw material sent to the headbox is being used for the paper and how much falls through the wire. This material is a mixture of fiber, fines, filler, and chemicals. To keep as much of them on the wire, a retention aid is added and controlled with the result from the white water consistency measurement.
A third measurement that is important is air content. The chemical itself is cheap compared to many other additives and is used to keep the air content or foam under control. An effect that is underestimated, is the connection between deaerator and retention aid. A deaerator has a negative impact on the retention aid and drainage. Saying this, it has a direct impact on the efficiency of the retention aid and runnability of the machine.
Other important measurements that should be available in the wet-end are pH and conductivity. pH needs to be controlled as it can influence the dissolution of calcium carbonate and creates additional air and have an impact on the reactivity of functional additives, e.g. starch. Conductivity can be used to explain several interrelationships in the process. Closed water circuits have high conductivity and a big impact on the behavior of used additives.
All described controls need to be fast and accurate, which is best achievable with single-point measurements. Speed is important.
Join us for a deep dive into the world of wet-end optimization, as our experts share key insights on managing variabilities and improving efficiency. This webinar will feature three levels of case studies, providing actionable strategies for driving success in your processes. Don’t miss out on this opportunity to enhance your wet-end operations and maximize productivity.
Zugriff anfordernBTG integriert Lösungen für nachhaltige Steigerungen der Geschäftsleistung in allen Ihren Betrieben
Führende Produktanwendungslösungen bieten erstklassige Lösungen für die Fertigung
Ein integrierter Whole-of-Mill-Ansatz, der neue Ebenen der Prozessoptimierung erschließt
Messbare Leistungssteigerungen, die Betriebs-, Wartungs- und Projektfachleute unterstützen
Erhalten Sie Zugriff auf unsere Marketingmaterialien, Installationsanleitungen usw.
Dieser Inhalt wird automatisch übersetzt
DE 
EN 
FR 
ES 
JA 
TH 
ID 
PT 