ID 
EN 
ES 
JA 
TH 
PT Lab solutions
BTG’s Mütek™ line of lab instruments is renowned for reliability and ease of use, setting the industry standard in charge measurement. These portable instruments are designed for both lab and field use, providing essential data for applications like particle charge analysis, zeta potential, and dewatering. They help optimize processes, reduce costs, and ensure smooth operations.
BTG’s technology enhances lab measurement capabilities wherever needed.
Applications
Pengolahan air proses
The treatment of industrial process water ensures a continuous supply of purified or conditioned water through procedures like solid separation via coagulation or dispersant addition. Charge measurement, such as with the Mütek™ PCD-06, accurately determines the charge demand of process water, optimizing the use of additives like coagulants or dispersants. This enhances process efficiency while minimizing additive costs and environmental impact.
Stabilitas pigmen
Charge measurement with the Mütek™ PCD-06 and SZP-16 is essential for evaluating the stability of pigment dispersion. Pigments carry charges that create electrostatic repulsion; low charges lead to flocculation, while high charges ensure better particle distribution and stability. Measuring charge helps optimize dispersant dosage – too little leads to instability, while excess can cause unwanted interactions. Monitoring charge over time predicts sedimentation, viscosity changes, or phase separation. Charge measurement aids in formulating water- and solvent-based systems by aligning pigments with additives to avoid instability caused by charge mismatches.
Reaktivitas aditif
The Mütek™ PCD-06 measures the charge density of additives like coagulants, flocculants, strength agents, dispersants, binders, etc. and has become a best practice tool for quality control, warranty management and product development amongst additive manufacturers. In the later industrial application of additives, BTG’s lab analyzers PCD-06, SZP-16 and DFR-05 help measure the interaction between additives and suspensions quickly and accurately, allowing for verification and selection of chemical additives, as well as determining the best dosage point and amount.
Products
PCD-06
The Mütek™ PCD-06 Particle Charge Detector measures the charge of colloidal dissolved substances in aqueous samples. In aqueous systems, solid particles as well as colloidal dissolved substances carry electrical surface charges, a phenomenon occurring in suspensions and emulsions.
Pelajari lebih lanjutSZP-16
The Mütek™ SZP-10 System Zeta Potential identifies the surface charges of fibers, pigments and other solid materials. Measuring samples before and after chemical contact, it evaluates the performance of e.g. wet strength agents, sizing agents, dispersants or coatings in a manufacturing process.
Pelajari lebih lanjutDFR-05
The lab device MütekTM DFR-05 Drainage Freeness Retention simulates the retention and drainage conditions prevailing in a paper machine immediately before and during sheet forming. This enables a systematical assessment of chemical influences.
Pelajari lebih lanjutDiscover the latest charge measurement devices and their top of the art functionalities
Additional Services
Laboratorium Aplikasi
With our application labs we are your trusted partner in advanced material analysis and process optimization.
Pelajari lebih lanjut
Seminar Akademi Mütek™
Just can`t seem to get enough of Mütek™ lab instruments? Or do you want your new colleagues to dip a toe into charge measurement?
Pelajari lebih lanjut
Layanan instrumen LabCheck™
To guarantee reliable measurements from the start every Mütek™ laboratory instrument undergoes thorough testing before leaving the factory.
Pelajari lebih lanjut
